Port Forwarding?

Home › Forums › Help and Support › Port Forwarding?

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • March 4, 2016 at 8:02 pm #4121
    Skyler819
    Participant

    I was wonder what i should port forward to, to allow friends to join. If thats possibe. im on 0.5.1, and should it be TCP or UDP?

    March 4, 2016 at 10:09 pm #4122
    HappyAngryCatfish
    Community Helper

    First off if you do host a server for friends with 0.5.1 you will not be able to see each other or chat. (Not even 100% sure if it’ll even work)

    March 4, 2016 at 11:17 pm #4124
    CDFalcon
    Participant

    TCP, UDP, and you must use 6.1 or higher.

    March 5, 2016 at 9:51 am #4125
    Glass
    Participant

    Moderator
    TCP, UDP, and you must use 6.1 or higher.

    What ports should I use to portfoward (ex Minecraft is 25565) and what version should my friend use

    March 5, 2016 at 2:20 pm #4128
    Timtech
    Keymaster

    Okay, if you are using any version below 0.8 you will not be able to see each other.

    You’ll need to forward ports 1001, 2002, 2003, and 2004 for both TCP and UDP.

    March 5, 2016 at 4:26 pm #4129
    Wincent
    Participant

    Is it a way to downlode 0.8? Or is it not out yet?

    March 5, 2016 at 5:07 pm #4130
    HappyAngryCatfish
    Community Helper

    @Wincent 0.8 is the unfinished Dev version. It is only available on Github. The setup is not supported.

    March 6, 2016 at 9:51 am #4140
    Xiphoseer
    Moderator

    Actually, only port 1001 is required for the Auth server. All other ports should be configurable in config.ini

    March 6, 2016 at 11:39 am #4142
    Glass
    Participant

    I have other questions
    1) Can I use Hamachi to port forward
    2) Since you can only see your friends in 6.1 or above why is it stuck at 0% at Venture Explorer
    3) I’ve looked around the forums for the 0% fix there is nothing, I have 0.7 but there is no starting .exe

    March 6, 2016 at 1:23 pm #4147
    HappyAngryCatfish
    Community Helper

    People have attempted to give you help but you don’t seem to really know what your doing. There is no starting .exe because it is no starting .exe because it isn’t compiled. There is no support provided for unreleased versions.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.

Comments are currently closed.